Learn how to program the handheld remote and pair it with your Threadwell drape! Just remember that the steps to program your controls vary depending on the type of motor (plug and play vs. battery). Find the instructions here!
Steps:
Insert battery pack and listen for a beep to indicate that power is on.
If programming a 1-channel remote, go to step 3. If 5-channel, select a channel to link by pressing the Channel Selector button. The LED will light up to indicate the channel has been selected.
Press and hold UP and DOWN buttons simultaneously. Drape will jog once. Remote is now paired to the motor.
Test programming! Drape should open by pressing the UP button and close when pressing the DOWN button.
If direction is incorrect, press and hold MY button until drape jogs once to modify direction. Repeat step 4 to confirm.
Using a paper clip, briefly press the Programming Button, located in the back of the remote, until drape jogs. All settings are now confirmed and programming is complete.
If programming multiple treatments (5 channel remote), repeat sequence for subsequent channels .
NOTE: When working with multiple motorized shades, power only the one being programmed.
Ready to put this into practice? Download the printable reference card below to keep these essentials close at hand, and come back soon for more tips, techniques, and inspiration from Threadwell.